12V or 24V
Flooded, SLA, AGM, Gel, and Lead Acid Battery Packs
5.6 * 2.8
* 1.5 in. (143 * 71 * 37 mm)
has NOT been tested and approved by Underwriters’ Laboratory
Features of the 12V or 24V 10A MPPT for Flooded,
SLA, AGM, Gel, and Lead Acid Battery Packs Solar
crest or multi crest tracing technique, used when the solar panel is under
shadow or part of the solar panel is damaged.
maximum power point tracking algorithm which could promote energy utilization
efficiency of PV system. The charging efficiency is 15%-20% higher than PWM
the best working point of I-V curve within one minute, the MPPT efficiency
could reach 99.9%.
digital power supply techniques which make the energy conversion efficiency
reach up to 97%.
charging stages: MPPT – equalizing charge – boosting charge – floating charge.
current-limiting charging mode, when the power of the solar panel is oversized,
the controller will lower the charging power automatically, which enables the
system to work under the rated charging current.
code indication to help users confirm the system fault.
load control methods. Can recognize day and night automatically.
system protection functions, including over-charge, over-discharge, over-load,
over-heat, battery reversing connection and short circuit protection.
System Voltage: 12V or 24V
Max Solar Input Voltage: <150V
Rated Charge Current: 10A
Transfer Efficiency: <96% or <97%
MPPT Tracing Efficiency: >99%
Working Temperature: -31F~149F (-35C~+65C)
No-load loss: <15mA