Bestgo offers the "Preferred" series lithium ion battery packs to suit different kinds of applications. The chemistry of the battery pack consists of Lithium Iron Phosphate (LiFePO4) which is the safest li-ion battery. All battery packs are equipped with aluminum cases for strength and safety. They are light in weight, reliable in strength, with good thermal conductivity. They are also attractive in appearance with a rounded corner shape.
These Preferred battery packs are sealed to meet IP66 protection level so they can be used in many harsh conditions. To realize this design, Bestgo uses the most advanced cells which can offer superior performance that will generate much less heat than other competitor’s products. The Preferred packs feature passive cooling without a fan.
However, if the battery packs need to offer continuous high-power input and output (like within 2 hours charging from empty to full, or discharging from full to empty in 2 hours), and the surrounding temperature is high, please consider offering some air cooling or liquid cooling method to keep the battery pack within a reasonable temperature. If the battery pack is not overheated, it will have a long life.
The Preferred packs have handle(s) for lifting and carrying. In addition, they have an intelligent indicator to show the voltage, current, SOC and capacity etc. Red and black terminals with M8 screw holes build on top lid for power cable connection. There are 3 screw holes on each long side of the battery pack. Each screw hole has a size of M4*8. They can be used to fix the battery pack with bolts. Screw holes do not affect IP level as the end of hole is totally sealed.
Lithium Iron Phosphate (LiFePO4)
Pack Dimension (L*W*H) and connector type: 17 * 10.5 * 10 in. (432 * 266 *
254mm) (metal case size)
and black terminals with M8 screw hole. Terminals have 18mm height above case.
Pack Weight: 82 Lbs. (37.2 Kg)
and Fuse: PCB BMS and fuse are built inside case. The fuse is 250A slow type.
Capacity: > 204 Ah (typical) at C/3, 73°F (23°C); > 200 Ah (minimum) at C/3,
Voltage: 25.6 V (average) at C/3, 73°F (23°C); Working voltage range is 29.2 ~
Voltage: < 29.2 V at CC/CV charge mode (Can be charged to 28.8V for longer
Cut Off Voltage: 19.2 ~ 20 V (When any cell's voltage reaches 2.4V this
protection will be triggered) (Set device (like controller) low volt protection
much higher to avoid triggering this protection.)
Charge Current: < 200 A at 180s, 23°C, 20%< SOC <70%; < 400 A at
15s, 23°C, 20%< SOC <70% (Consider heat accumulation inside pack, we
suggest average current < 70A.)
Discharge Current: < 200 A at 180s, 23°C, 30%< SOC <100%; < 400 A
at 15s, 23°C, 30%< SOC <100% (Consider heat accumulation inside pack, we
suggest average current < 100A.)
Battery Cycle Life: > 3000 times at 80% DOD, C/3, 23°C (After test it can deliver > 80% rated capacity.)
Resistance: 10 milliohms (DCIR test method, at 10s, 50% SOC)
protection for charging process: 0 ~ 5 °C < inside cell sensor < 52 ~ 58
°C (If inside sensor detected temperature is out of range, BMS will trigger
protection for discharging process: Inside cell sensor: < 65 ~ 70 °C (If
inside sensor detected temperature is out of range, BMS will trigger
working condition temperature: Charge: 41 ~ 113°F (5 ~ 45°C); Discharge: -4 ~
131°F (-20 ~ 55°C) (Suggested for charging: 50 ~ 104°F (10 ~ 40°C); Suggested
for discharging: 14 ~ 113°F (-10 ~ 45°C)
Temperature: 14°F ~ 104°F (-10°C ~ 40°C) (for < 3 months) Keep SOC at 40~60%
for long term storage.
Note: Inside the battery pack are temperature sensors attached to the cells and a BMS. Because the temperature measuring is
not very accurate, the BMS may trigger protection at the certain range of
temperature. Due to a passive cooling design which does not have a fan for
cooling, please consider the heat accumulation inside the pack. When in a hot
temperature please do not charge or discharge the battery pack with a big constant
current, it may trigger temperature protection.
* SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your 12V 400Ah
LiFePO4 lithium battery pack order.
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or go
through our Contact
2. Place your order by clicking in the shopping pallet “Proceed
a. Enter your information so we can get you a shipping quote
b. Select the “Shipping Method” of preference
c. Confirm the “Choose one payment method” has “Shipping Quote
d. Click the “Check Out” button
e. You’ll receive a confirmation email of your request, as will
We’ll research the exact shipping cost and send you an invoice
to your email for your 12V 400Ah
LiFePO4 lithium battery pack order.
discounts show in the “Shopping Pallet”.
We love to meet or beat any competitor’s price!
Higher volume discounts, price matching or questions?
Contact Carl, our resident specialist.
9am-9pm Mon-Sat MDT
or through our Contact Us page