12 Volt Advanced Alternator Regulator Kit
For 12V Charging Systems

The 12 Volt advanced alternator regulator kit works with the following battery types:

·        Lithium (LiFePO4)

·        Standard Flooded Lead Acid

·        Deep Cycle Flooded Lead Acid

·        Gel

·        Standard AGM

·        Carbon Foam AGM

·        High Density AGM / TPPL

Features of the WS500 alternator regulator:

·        CAN (Control Area Network) ports

·        Coordination of charging goals and objectives; all devices work towards the same goal vs. fighting each other.

·        Tight BMS integration. CAN communications allow for the WS500 Alternator Regulator to fully integrate with the needs and directions of a BMS at levels unattainable using simple “Charge Enable” wires.

·        Prioritization of charging sources. e.g.: Utilization of Solar to its maximum capability while filling in the remaining energy needs from an engine driven alternator thereby saving fuel.

·        Remote sensing / Port Expander: The Alternator Regulator is able to take advantage of the CAN communications capability to transfer real-time battery status: Voltage, Amperage, and Temperature as well as operational status (e.g., off-line in the case of a LiFePO4). By using this capability wiring and installations may be simplified.

·        Self-healing / fail over: Ability to self-recover from a failed, removed, or turned-off device. The system continuously monitors all devices and adjusts as needed.

·        “Get-Home” total system failure mode: In the event of a catastrophic total system communications failures, the Alternator Regulator will fail-to-safe and operate in a stand-alone mode allowing for continued charging, but perhaps with less optimization and longer times needed.

Quantity discounts show in the “Shopping Pallet”.

We love to meet or beat any competitor’s price!

Contact us with questions

9am-5pm Monday-Friday (mountain time)

(801) 566-5678

or email

[email protected]

or through our Contact Us page