It has many unique features unavailable on the HP12048D such as:
1. Powerful DSP control, wide range of configurable spec
2. 120A 150VDC MPPT solar charger
3. BMS port to communicate with lithium battery
4. WI-FI/ GPRS remote monitoring on APP
5. Load detection on both hotlines
The recommended spec is:
Low Battery Cut Off: 40Vdc (40-48Vdc resettable)
Solar/Battery to Utility (DC to AC) transfer voltage: 44V (44-51.2Vdc resettable)
Utility to Solar/Battery (AC to DC) transfer voltage: 50V (48-58Vdc resettable)
CV/Fload voltage: 50V (48-58.4V resettable)
Features:
Automatic Solar Charging When the Inverter is Powered Off
Auto Generator Start
Smart remote monitor with Wi-Fi or GPRS Module
Manual 50Hz/60Hz output frequency switch for worldwide operation
Maximum THD: 3% at nominal battery voltage
Powerful 4-stage power factor corrected battery charger up to 100 Amps, settable from 10A-100A
High surge output capability, 300% peak load for 5 seconds
Ultra-low quiescent current, low power ‘Power Saver Mode’ to conserve energy
Equalization Charging
10ms transfer time from AC to battery for the continuous load operation
Thermally controlled variable speed fan for more efficient cooling
Extensive protections against various harsh situations
Solar Priority or SBU developed for renewable energy systems
120A MPPT solar charger (Max Input Voltage - 250V) (Input Current - Two circuits of 60 Amps each per one circuit at 120 Amps)
Specifications:
Inverter Output Specifications:
Continuous Output Power: 12000 Watts
Surge Rating: 36000 Watts (5 Seconds)
Output Voltage: 104/208V, 110/220V, 115/230V, 120/240Vac (resetable on LCD)
Nominal Efficiency: 85% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: <10%
Non-Lithium version Input Specifications:
Nominal Input Voltage: 48.0Vdc
Low Battery Cutoff: 40.0-48Vdc
Low Battery Alarm: 42-50Vdc
DC to AC Transfer in SBU or Solar first mode: 44-51.2V
AC to DC Transfer in SBU or Solar first mode: 48-58V
High Voltage Cutoff: AGM:60V/FLD:62V/ USE mode: C.V+4V
High Voltage Recovery: 58V
Lithium version Input Specifications:
Low Battery Cutoff: 5%-30% SOC
Low Battery Alarm: Low Battery Cutoff SOC+5%
DC to AC Transfer in SBU or Solar first mode: 20%-50% SOC
AC to DC Transfer in SBU or Solar first mode: 60%-100% SOC
High Voltage Cutoff: AGM:60V/FLD:62V/ USE mode: C.V+4V
High Voltage Recovery: 58V
Idle Consumption: 180 Watts
Power Saver Mode Idle Consumption:40 Watts
Charger Specifications:
Output voltage: Depends on battery Type
AC Charger Rate: 100Amp
Solar Charger Rate: 120Amp
Over-Charge Protection Shutdown: 62.8V
Selectable Charge setting based on battery type
Adjustable charge current: off-20%-100%
Four Stage Smart Charger
Dimensions:
Unit Weight: 165 lbs (75 KG)
Unit Size L x W x H: 25.6 * 15.0 * 8.9 in. (650 * 380 * 225mm)
Shipping Weight: 184 lbs (84 KG)
Shipping L x W x H: 29.9 * 21.3 * 16.1 in. (760 * 540 * 410mm)
