24V 30A MPPT
Flooded, SLA, AGM, Gel, Lead Acid Battery
LiFePO4 (Lithium) Battery Packs
With Remote Communication Capability
9.4 * 6.8
* 2.8 in. (238 * 173 * 72 mm)
This Solar Charge Controller has a unique feature that will allow it to restart
a lead-acid battery pack.
Charge Controllers can operate in parallel.
These solar charge controllers have a Bluetooth
function included to monitor the working status of the controller and its whole
system. The BT-1 and BT-2 Bluetooth adapter is used to extend Bluetooth
communication function of the Bluetooth module. Mobile phone app can be used
for wireless monitoring, parameters setting, and data view.
to see the detailed User Manual
· Advanced dual-peak or multi-peak tracking technology.
· Built-in algorithm for maximum power point tracking to significantly improve the energy utilization efficiency of photovoltaic systems.
· Charging efficiency 15%-20% higher than traditional PWM solar charge controllers.
· Combination of multiple tracking algorithms that can track the optimum working point of I-V curve accurately in a very short time.
· MPPT efficiency can be as high as 99.9%
· Advanced digital power supply technologies to raise the circuit’s energy conversion efficiency to as high as 98%.
· Charging program options for different types of batteries including gel batteries, sealed batteries, open batteries, lithium batteries, etc.
· Current-limiting charging mode. When the power of a solar panel is too large, and the charging current is greater than rated current, the solar charge controller automatically reduces charging power to bring the charging current to the rated level.
· Instantaneous large current startup of capacitive loads.
· Automatic identification of battery voltage.
· LED fault indicators and an LCD screen to display abnormality information to help users quickly identify system failures.
· Supports data storage for up to a year.
· LCD screen display to enable users to view device operation data and status and modify controller parameters.
· Standard Modbus protocol to meet communication needs for various occasions.
· Built-in mechanism for over-temperature protection. When the temperature exceeds the set value, the charging current falls linearly with temperature, therefore slowing down the rise of controller temperature and avoiding controller damage from overheating.
· Temperature compensation function to automatically adjust charging and discharging parameters to extend battery service life.
· TVS lightning protection.
· Battery Voltage/Power: 12V/400W, 24V/800W
· Max Solar Input Voltage: 100V
· Rated Charge Current: 30A
· Rated Load Current: 20A
· No-load Loss: 0.7 W to 1.2 W
· Battery Voltage: 9V to 35V
· IP Rating: IP32
· Conversion Efficiency: <98%
· MPPT Tracking Efficiency: >99%
· Working Temperature: -31F~113F (-35C~+45C)
Mobile Bluetooth APP Wireless Monitoring Features:
· The controller supports a built-in Bluetooth module or external adapter, which is plug and play and easy to set up.
· Bluetooth module applies a Bluetooth 4.0 low energy technology, providing rapid communication and strong anti-interference capability.
· Communication distance is up to 15 meters (49 ft).
· The rich data display and setting functions meet the wireless monitoring requirements for solar controller data.
1. Press SELECT and ENTER buttons at the same time to enter the parallel mode setting interface.
2. Press the ENTER button for 5s until the number starts flashing. Then, press the SELECT button and the ENTER button to add or subtract the communication address number.
3. After setting the communication address (the number stops flashing), press the ENTER button to set the communication mode. C represents "normal communication mode", and P represents "parallel mode".
BT-1 and BT-2 Features:
· Adds wireless monitoring function onto the solar charge controller.
· Supports mobile phone app, plug and play, with simple settings.
· High performance and low power consumption of the Bluetooth special chip.
· Adopts Bluetooth 4.0 and BLE technology, has the characteristics of rapid communication and strong anti-jamming capability.
· Without external power supply (power supply directly by the communication port).
BT-1 and BT-2 Specifications:
· Input Voltage: 5V-12V
· Stand-by Power Consumption: 0.04W
· Run Power Consumption: 0.05W
· Communication Distance: <15m (49 ft)
· Serial Port Baud Rate: Fixed baud rate 9600bps
· Communication Methods: RS232 (BT-1) and TTL (BT-2)
· Interface Type: RJ12 (BT-1) and PH2.0 (BT-2)
· Connecting Line: Standard Ethernet Cable (parallel line)
· Size: 2.6*2.0*0.61 in. (66*51*15.5mm) (BT-1) or 2.6*1.4*0.61 in. (67.3*36*15.5mm) (BT-2)
· Installation Dimension: 2.3*0.47 in. (57.8*12mm) (BT-1) or 2.28*0.47 in. (57.8*12mm) (BT-2)
· Operating Temperature: -4F~167F (-20C~75C)
· Level of Protection: IP67
· Net Weight: 4.2 oz. (120g)
SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your 12V or 24V 30A MPPT solar
charge controller order.
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or go
through our Contact
your order by clicking in the shopping pallet “Proceed To Checkout”
your information so we can get you a shipping quote
the “Shipping Method” of preference
the “Choose one payment method” has “Shipping Quote Request” selected
the “Check Out” button
receive a confirmation email of your request, as will we
We’ll research the exact shipping cost and send you an invoice
to or email or you can add it to your pallet in $1
for your 12V or 24V 30A MPPT solar
charge controller order.
PARA ESPAÑOL *
Si se encuentra en un país
hispanohablante (América Latina / España) y desea comprar este producto,
deberá ponerse en contacto con Reid. Es un proceso realmente simple que
consiste en enviar información de envío (dirección y fecha de llegada
deseada) @ [email protected].
Investigaremos el costo de envío
exacto y le enviaremos una factura por su producto.
Quantity discounts show in the
We love to meet or beat any competitor’s price!
our Contact Us page