| 200A, 12,000W, 12kW
Contactor
12V, 24V, 48V, 60V, 72V,
96V or 120V DC Coil
Single Pole Single Throw
(SPST) or
Single Pole Double Throw
(SPDT)
With Magnetic Blowouts UL Listed
Max DC Contact Voltages and Amperages
12V 1000A---24V 500A
48V 250A---72V 160A
96V 125A---120V 100A
144V 80A---300V 40A
12V, 24V, or 48VDC Coil USA
Stock!
20 each 12V in USA Stock
(no minimum order)
10 each 24V in USA Stock
(no minimum order)
0 each 48V in USA Stock
(no minimum order)
This contactor is the standard of the EV industry. Your 200A
12,000W, 12kW contactor comes with a 12V, 24V, 48V, 60V, 72V, 96V or
120V DC Coil. A bracket and screws are included with the contactor. Multiples
of this contactor can be used in series for higher voltage battery packs.
Always ensure that the products you use are within their ratings.
FEATURES for your 200A 12,000W, 12kW EV Contactor Set
o 200A
Contact Switching
o SPST-NO
Contact
o Maximum
Coil Energy Draw: 15W
o 1.5A
Power Draw
o To
confirm the contact will work for your needs, multiply the contact current
rating below (100A) by the contact rating voltage below, (60 for DC) and you
get the max wattage of the contactor (6000W, 6kW)
§ then divide the wattage by
your expected maximum voltage, example: 144V (6000/144=41.6)
§ And you get the max
amperage of 41.6A
§ You will need to stay under
the max Wattage of 6000 at all times in order to keep your contactor safe
SPECIFICATIONS for your 200A 12,000W, 12kW EV Contactor Set
|
Contact
|
1H
(SPST-NO)
|
|
Contact Material
|
AgCdO(12)
|
|
Contact Rating(at Resistive Load)
|
200A
60VDC
200A
240VAC
|
|
Max. Switching Voltage
|
60VDC,240VAC
|
|
Max. Switching Power
|
50,000VA
|
|
Endurance of Over Load Current(7Ie/10S)
|
1400A/10S
|
|
Coil Rated Voltages Available
|
12,24,48,60,72,96,120 VDC
|
|
Pick-up Voltage
|
(40~70)
% of coil rated voltage
|
|
Drop-out Voltage
|
(5~30)
% of coil rated voltage
|
|
Contact Pressure Drop
|
At
most 30mv when 100A
|
|
Insulation Resistance
|
Min. 100 Milliohms at 500VDC
|
|
Dielectric Strength
(Between Insulated Electric Parts)
|
1000VAC
50 HZ/60 HZ (1 minute)
|
|
Operate Time
|
Max.
50mSec.
|
|
Release Time
|
Max.
50mSec.
|
|
Ambient Temperature
|
-13F~+104F
(-25C~+40C)
|
|
The shocking of fixed point
|
(10~200)HZ,Acceleration <3.5g
|
|
Shocking
|
(60~100)
time/minute,Acceleration <4g
|
|
Mechanical Life
|
100,000
Operations (no load)
|
|
Electrical Life
|
50,000
Operations (at rated load)
|
|
Relative Humidity
|
Up
to 98% at +68F (+20C)
|
|
Mounting Directions
|
Can
be mounted vertically or horizontally, if mounted vertically the coil should
be at the bottom
|
|