|
Pre-Charge 1
|
This stage is active only if the
battery is severely discharged and helps protect and recondition the cells
against damage.
|
|
Pre-Charge
2
|
Moderate current to avoid peak current
damage.
|
|
Bulk
Charge
|
Maximum current according to the
maximum capability of the charger
|
|
Absorption
Charge
|
Declining current to maximize battery
capacity.
|
|
Analysis
|
Determines the battery charge status
and battery saturation.
|
|
Power
Down
|
Shuts down voltage and current to avoid
overcharging and battery voltage variations caused by trickle current at
after charging.
|
|
Auto
Recharging
|
If the battery voltage drops, the
charger automatically re-starts charging.
|
** Current Protection
1. AC
Power Overload – Contains a fuse, should the AC power be over-loaded.
2. Reverse
Polarity - If the battery clamps are connected incorrectly, the batteries
and charger will not be damaged.
3. Battery
Voltage – Microprocessor will automatically detect battery voltage/current to
avoid battery overheating/charging.
4. Charger
Overheat - Drops output power to protect the charger against overheating.
5. Short
Circuit - Stops output power when positive and negative short together.
6. Anti-Arc
– The clamps will not spark if touched together or when connecting to the
batteries.
7. Disconnect
– Should a clamp fall off, system goes to standby.
8. BMS
Power-up – If there is a battery that becomes severely discharged and the BMS
is shut off, the charger will turn on the BMS. (Caution: If polarity is
reversed it may cause BMS damage.)
|
*
SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your 24V 45A LiFePO4 lithium
battery intelligent charger order.
1. Contact
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or go
through our Contact
Us page
Or
2. Place
your order by clicking in the shopping pallet “Proceed To Checkout”
a. Enter
your information so we can get you a shipping quote
b. Select
the “Shipping Method” of preference
c. Confirm
the “Choose one payment method” has “Shipping Quote Request” selected
d. Click
the “Check Out” button
e. You’ll
receive a confirmation email of your request, as will we
We’ll research the exact shipping cost and send you an invoice
to or email or you can add it to your pallet in $1
Shipping Increments
for your 24V 45A LiFePO4 lithium
battery intelligent charger order.
*
PARA ESPAÑOL *
Si se encuentra en un país
hispanohablante (América Latina / España) y desea comprar este producto,
deberá ponerse en contacto con Reid. Es un proceso realmente simple que
consiste en enviar información de envío (dirección y fecha de llegada
deseada) @ [email protected].
Investigaremos el costo de envío
exacto y le enviaremos una factura por su producto.
|
Quantity discounts show in the
“Shopping Pallet”.
Contact us
with questions
9am-5pm Monday-Friday
(mountain time)
(801) 566-5678
or email
[email protected]
or through
our Contact Us page
Electric Car Parts Company