48V 100Ah - 25 KWh
Lithium Battery Energy Storage System
23.6 * 23.6 * 60.2 in.
(600 * 600 * 1530 mm)
This 25 KWh lithium battery energy storage system is an all-in-one solar and storage solution which integrates the inverter, battery charger, UPS, and battery enclosure into a pre-wired modular system for easier and faster installation.
Features:
The whole system is non-toxic, no-polluting
and environmentally friendly.
Cathode material is made from LiFePO4
with safety performance and long cycle life.
Battery Management System (BMS) has
protection functions including over-discharge, over-charge, over-current, and
high/low temperature.
The system can automatically manage
charge and discharge state, balance the current, and voltage of each cell.
The ESS is pre-wired and factory tested
to enable quick installation. It only takes 5 minutes to connect the system to
your customer’s home internet. The modular system is expandable with battery
storage to suit the customer’s needs.
The system can automatically switch to
back-up mode in less than 0.01s (UPS level).
Working temperature range is from 32F
to 122F (0C to 50C), with excellent discharge
performance and cycle life.
Design for home appliances, easy to
install and handle.
Specifications:
Battery Capacity: 100Ah
Storage Capacity: 25.6 KWh
Available Capacity: 23 KWh
Cycle Life: 4000, 90% DOD @ 77F (25C)
Battery Pack Voltage Range: 224-288V
Max Charge/Discharge Current: 25A/30A
Communication with BMS: CAN
Cell Type: Li-ion (LFP)
MPPT Efficiency: 99.90%
Max Efficiency: >97.80%
Battery Efficiency: >98.10%
Max PV Input Power: 7.8kW, 10.4kW, or
13kW
Max PV Input Voltage: 1000V
MPP Operation Voltage Range: 180-950V
Max Number of PV Strings per MPPT: 1/1
Max PV Input Current: 12.5A/12.5A
Short-circuit Current of PV Input: 13.5A/13.5A
Rated Power: 6kW, 8kW, or 10kW
Max Apparent AC Power: 6000VA, 8000VA,
or 10,000VA
Nominal AC Voltage: 380VAC (L/N/PE)
AC Power Frequency: 50Hz/60Hz
Max AC Output Current: 10A, 12A, or 15A
Power Factory Range: ~1 (Adjustable
from 0.8 leading to 0.8 lagging)
Output THDi (@ Nominal Output): < 3%
Rated Output Power: 6kW, 8kW, or 10kW
Max Apparent AC Output Power: 6000VA,
8000VA, or 10,000VA
Nominal AC Output Voltage: 380VAC
(L/N/PE)
Max AC Output Current: 10A, 12A, or 15A
Operating Temperature Range: -13F
…+140F (-25C …+60C) (>113F (>45C) derating)
Operating Altitude: >9,840 ft. (<3000m)
Noise: <40 dB
Topology: Transformerless
Cooling Method: Intelligent Fan
Ingress Protection Rating: IP21
Relative Humidity: 5-85%, no
condensation
Display: LED Touching Screen
Communication with Portal: RS485
(WiFi/GPRS Optional)
Communication with Meter: RS485
Dimensions (W*H*D): 23.6 * 23.6 * 60.2
in. (600 * 600 * 1530 mm)
Safety: IEC62109-1/-2
EMC: EN61000-6-1/-2/-3, IEC61000
On-Grid Standard: AS4777.2,
NRS097-2-1:2017
Transportation: UN38.3
