45kW Inverter/Charge
Controller
48V DC Input
240V 50Hz or 60Hz Output
80A Battery Charger
Pure Sine Wave
Three Phase
Works With Lithium or
Lead Acid Batteries
29.9L *
20.2W * 33.4H in
760 * 513
* 848 mm
595 Lbs. / 270 Kg
View the
Inverter Manual Here with mechanical drawings, features, and
performance information!
Pricing Options
$10,590 – Total cost with ocean freight shipping
to nearest International seaport in the Continental USA – Allow for 8-10 week
delivery
Call for
pricing above 5 each at (801) 566-5678
Features:
Smart LED Remote Control
Battery Temperature Sensor (BTS)
Automatic Generator Start (AGS)
Designed for Harsh Environment Operation
DC Start & Automatic Self-Diagnostic
Function
Easy to Install & Easy to Operate
& Easy to Solve
Low DC Voltage Supports Home &
Office Appliances
High Energy Charging Function, Selectable
From 0%-100%
High Efficiency Design & “Power
Saving Mode” to Conserve Energy
Battery Priority Mode, Designates the
Inverter-Preferred UPS Configuration
26/52Vdc Battery Recover Point,
Dedicated for Renewable Energy Systems
8 pre-Set Battery Type Selector Plus
De-sulphation for Totally Flat Batteries
4-step Intelligent Battery Charging, PFC
(Power Factor Correction) for Charger
Independently controlled three-phase
output voltages & Load,100% Unbalanced load
0ms Transfer Time from Battery to
Utility; 8ms Typical Transfer Time from Utility to Battery
15s Delay Before Transfer when AC
Recover, Protection for Load when Used with Generator
Output Specifications:
Continuous Output Power: 45,000 Watts
Surge Rating: 135,000 Watts (20 Seconds)
Capable of Starting Electric Motor: 45HP
Acceptable Unbalanced Load: 100%
Output Waveform: Pure Sine Wave/Same as
input (Bypass Mode)
Output Phase Voltage: 240Vac
Nominal Efficiency: 89% (Peak)
Line Mode Efficiency: >95%
Power Factor: 0.9-1.0
Connection Mode: 3-phase 4-wire system +
Ground
Output Voltage Rating: 3AC/N 400V or
208V
Output Voltage Regulation: 10% RMS
Output Frequency: 50 or 60 Hz +/- 0.3Hz
Short Circuit Protection: Yes, Current
Limit Function (Fault after 60ms)
Typical Transfer Time: 6-8ms (10ms Max)
THD: <3% (Linear Load)
Input Specifications:
Nominal Input Voltage: 48VDC
Minimum Start Voltage: 42VDC / 44VDC
Low Battery Alarm: 42VDC / 44VDC
Low Battery Trip: 40V / 42V
High Voltage Alarm & Fault: 64VDC
High DC Input Recovery: 62VDC
Low Battery Voltage Recover: 52VDC
Idle Consumption Search Mode: <100
Watts (when Power Saver on)
Charger Specifications:
Output voltage: Same as input
Charger Breaker Rating (240VAC): 80A
Max Charge Rate: 450A
Power Factor: 0.97 MAX
Over Charge Protection Shutdown: 15.7V
for 12VDC (*2 for 24VDC, *4 for 48VDC)
Battery Type: Float VDC
* SHIPPING/PAYMENT
OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your 48V 45kW 240VAC pure sine wave
three phase inverter order.
1. Contact
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected]
or go through our Contact Us
page
Or
2. Place
your order by clicking in the shopping pallet “Proceed To Checkout”
a. Enter
your information so we can get you a shipping quote
b. Select
the “Shipping Method” of preference
c. Confirm
the “Choose one payment method” has “Shipping Quote Request” selected
d. Click
the “Check Out” button
e. You’ll
receive a confirmation email of your request, as will we
We’ll research the exact shipping cost and send you an invoice
to your PayPal or email or you can add it to your pallet in $1 Shipping
Increments
for your 48V 45kW 240VAC pure sine wave three phase inverter order.
|
Quantity discounts show in the “Shopping
Pallet”.
We love to meet or beat any competitor’s price!
Contact us
with questions
9am-5pm Monday-Friday
(mountain time)
(801) 566-5678
or email
[email protected]
or through
our Contact Us page