48V-51.2V-57.6V
16 Cell-Battery Series Set
10A-150A Max Current Mini BMS-PCB-PCM
Protective Circuit
Board (PCB)
Protective Circuit
Module (PCM)
UL, SGS and UKAS
Certified
Custom Built Lithium
LiFePO4 LFP
PCB-PCM
China Stock
If ordering more than 1 PCB model, add
them to the pallet individually.
You'll need to know your
maximum charge and peak discharge amperages to choose your PCB.
Example:
The second one ECPC-140 is both 15A maximum charge and 15A peak discharge
capable.
It can't be more, but it can be less down to 1A.
The maximum suggested
length for each wire from PCB to battery is 45cm for maximum balancing and PCB
function.
|
Max Continuous Charge &/or
Discharge
Current
|
Wire Included (30cm or 45cm)
|
Balance voltage for
single cell (±0.025V)
|
Balance mA current for
single cell (±10mA)
|
Size in mm
(Length * Width * Height)
|
ECPC Model Number
|
Amount Each (USD $)
|
|
10A Charge
25A Discharge
|
Yes
|
3.6
|
72
|
60 * 50 * 23
|
ECPC-132
|
$56
|
|
15A - is both charge and discharge
max
|
Yes
|
3.6
|
82
|
75 * 62 * 6
|
ECPC-140
|
$56
|
|
15A
|
Yes
|
3.6
|
70
|
130 * 65 * 35
|
ECPC-174
|
$58.80
|
|
20A Charge
80A Discharge
|
Yes
|
3.6
|
144
|
120 * 80 * 15
|
ECPC-131-20
|
$96.60
|
|
35A
|
Yes
|
3.6
|
72
|
140 * 70 * 15
|
ECPC-163
|
$71.40
|
|
35A
|
Yes
|
3.6
|
72
|
115 * 65 * 12
|
ECPC-167
|
$72.80
|
|
40A
|
Yes
|
3.6
|
72
|
180 * 65 * 12
|
ECPC-166
|
$89.60
|
|
50A
|
Yes
|
3.6
|
144
|
120 * 80 * 15
|
ECPC-131-50
|
$96.60
|
|
80A
|
Yes
|
3.6
|
72
|
220 * 120 * 30
|
ECPC-138
|
$137.20
|
|
80A
|
Yes
|
3.6
|
62
|
180 * 120 * 24
|
ECPC-083
|
$134.40
|
|
100A
|
Yes
|
3.6
|
105
|
220 * 120 * 47
|
ECPC-170
|
$309.40
|
|
150A
|
Yes
|
3.6
|
105
|
220 * 120 * 47
|
ECPC-170-40
|
$509.60
|
|
Current
|
Current consumption
|
<20µA
|
|
Voltage
|
Charging Voltage (3.6V/Cell-Series)
|
57.6
|
|
Over-charge Protection per Cell
|
Over charge detection voltage
|
3.6~3.9 (Adjustable-1)
|
|
Over charge detection delay time
|
0.5S~2S
|
|
Over charge release voltage
|
3.5~3.8 (Adjustable-2)
|
|
Over-discharge Protection per Cell
|
Over discharge detection voltage
|
2.0~2.5 (Adjustable-3)
|
|
Over discharge detection delay time
|
50~200mS
|
|
Over discharge release voltage
|
2.0~2.5 (Adjustable-4)
|
|
Over Current Protection per Cell
|
Over current detection voltage
|
0.1~0.2 (Adjustable-5)
|
|
Over current detection amperage
|
Defined by the max charge and discharge
|
|
Detection delay time
|
5~20mS
|
|
Release condition
|
Cut load, automatically recover
|
|
Short Circuit Protection
|
Detection condition
|
Exterior shot circuit
|
|
Detection delay time
|
200~500uS
|
|
Release condition
|
Cut load, automatically recover
|
|
Resistance
|
Inner resistance
|
<20 milliohms
|
|
Temperature
|
Operating temperature range
|
-40~+185°F (-40~+85°C)
|
|
Storage temperature range
|
-4~+257°F (-20~+125°C)
|
There are 2 protection
options for setting your PCB/PCM at:
3.9V option
1. Over charge
detection voltage needed? (3.6V-3.9V): 3.9
2. Over charge
release voltage needed? (3.5V-3.8V): 3.8
3. Over discharge
detection voltage needed? (2.0V-2.5V): 2
4. Over discharge release
voltage needed? (2.0V-2.5V): 2.3
5. Over current
detection voltage needed? (0.1V-0.2V) 0.1~0.2
Or 3.65V option
(safest for longest battery life)
1. Over charge
detection voltage needed? (3.6V-3.9V): 3.65
2. Over charge
release voltage needed? (3.5V-3.8V): 3.65
3. Over discharge
detection voltage needed? (2.0V-2.5V): 2.5
4. Over discharge
release voltage needed? (2.0V-2.5V): 2.5
5. Over current
detection voltage needed? (0.1V-0.2V) 0.1~0.2
Select the one that
you would like in the options below.
|
* SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your 48V-51.2V-57.6V, 16 Cell-Battery Series 10A-150A Max Current UL SGS and
UKAS Certified Custom Built Lithium LiFePO4 LFP PCB-PCM order.
1. Contact
us at (801) 449-0681 9am-5pm Monday-Friday or email info@electriccarpartscompany.com
or go through our Contact Us
page
Or
2. Place your order by clicking in the shopping pallet “Proceed
To Checkout”
a. Enter your information so we can get you a shipping quote
b. Select the “Shipping Method” of preference
c. Confirm the “Choose one payment method” has “Shipping Quote
Request” selected
d. Click the “Check Out” button
e. You’ll receive a confirmation email of your request, as will
we
We’ll research the exact shipping cost and send you an invoice
to your PayPal or email or you can add it to your pallet in $1 Shipping
Increments
for your 48V-51.2V-57.6V,
16 Cell-Battery Series 10A-150A Max Current UL SGS and UKAS Certified Custom
Built Lithium LiFePO4 LFP PCB-PCM order.
|
Safety and Use
§ Avoid overcharging or over-discharging your 48V-51.2V-57.6V, 16 Cell-Battery Series 10A-150A Max
Current UL SGS and UKAS Certified Custom Built Lithium LiFePO4 LFP PCB-PCM. Lithium batteries are
sensitive to being overcharged or overly discharged. Overcharging or
over-discharging lithium cells may lead to a much shorter cycle lifetime.
§ Do not immerse lithium batteries in water or allow them to get wet for
any prolong period of time.
§ If a battery cell smells bad, is very hot, or appears deformed, remove it
from the system and your 48V-51.2V-57.6V, 16
Cell-Battery Series 10A-150A Max Current UL SGS and UKAS Certified Custom Built
Lithium LiFePO4 LFP PCB-PCM. If
the battery is under manufacturer’s warranty take a picture of the battery as
soon as possible.
§ In the event of a cracked or physically damaged battery cell, do not
allow any lithium battery electrolyte to come in contact with your skin.
If you do come in physical contact with the lithium electrolyte wash the
exposed area with clean soapy water as soon as possible.
§ To avoid electrical shorts, do not ship or store any metal objects near
the battery terminals or your 48V-51.2V-57.6V,
16 Cell-Battery Series 10A-150A Max Current UL SGS and UKAS Certified Custom
Built Lithium LiFePO4 LFP PCB-PCM.
§ Do not incinerate or expose lithium batteries to a fire or high heat
source.
§ Store lithium batteries at 50% SOC, (State of Charge). Check and recharge
every 6 months.
§ Check the voltage of the battery pack before connecting your 48V-51.2V-57.6V, 16
Cell-Battery Series 10A-150A Max Current UL SGS and UKAS Certified Custom Built
Lithium LiFePO4 LFP PCB-PCM to ensure
that it is within the safe range. Inspect the BMS for damage before charging
the pack.
§ Clean any dirty electrodes or components with a dry cloth.
§ To avoid possible electrocution, always use caution when working
with your battery pack or the BMS system. Wear rubber gloves and have
a professional licensed electrician to assist you when working with your 48V-51.2V-57.6V, 16
Cell-Battery Series 10A-150A Max Current UL SGS and UKAS Certified Custom Built
Lithium LiFePO4 LFP PCB-PCM.
Quantity
discounts show in the “Shopping Pallet”.
We love to meet or beat any
competitor’s price!
Higher volume discounts, price matching or questions?
9am-9pm Mon-Sat MDT
(801) 449-0681
or email
info@ElectricCarPartsCompany.com
or through our Contact
Us page
|
