My Account  |  0 item(s)    View Cart
Home > 
INVERTERS AND SOLAR CHARGE CONTROLLERS

UL Approved 12kW Hybrid Inverter
ECPC-12kW-48V-Hybrid-Inverter-SA
Review this item Review this item
Email a friend Email a friend
Description

UL Approved 12kW Hybrid Inverter

48V DC Input

120V/240V/208VAC Split Phase

190A Battery Charger

DC to AC Power

Works With Lithium or Lead Acid Batteries

28.0L * 17.38W * 9.37H in

711 * 441 * 238 mm

77 Lbs. / 35 Kg

 

10 Year Factory Warranty


Can Be Paralleled

Price
Quantity Price
1+ $8,460.00
Price with Options:
$8,460.00


(Discounts, if applicable, will show in the "Shopping Pallet")

Notice: The prices shown are for merchandise and do not include shipping. Shipping will be billed separately.

Prices shown may be changed without notice.

12kW 48V DC Input DC to AC Power Hybrid Inverter
Shipping Method?
Delivery Date Needed? Enter it here:

Special Instructions? Enter them here:

Quantity

Features:

Grid-Interactive of Off-Grid capability in the same package - can be used with or without energy storage - add batteries down the line

Easy and fast to install - no external components (ie. fuses, breakers, combiner box) - all integrated in one unit

Lightweight - only 75- 77 lbs.

Color touch screen

Works with the widest variety of 48V battery chemistries - from lead acid to lithium

Backup power (even use the Grid as backup!) and support for time-of-use optimization

Completely pre-wired system - inverter and charge controller included

Wi-Fi integrated for easy monitoring of system performance

Integrated DC Disconnect, Auto Gen Start, Critical Loads panel

Highly efficient - both on-grid and off-grid

Generator support

Field-upgradeable software with remote support

NEMA 1 enclosure for indoor use only

Fully NEC compliant (North America) with rapid shutdown

UL1741SA/Rule 21 and 14H Compliant (Grid Sell Only)


Applications:

Grid-Tied Mode - Sell power back to the Utility to reduce your electric bill*

Meter Zero Mode - Zero your electric bill without adding an additional smart meter

Time-Of-Use Mode - Use solar and batteries to minimize grid power usage when it's most expensive

Smart Load Mode - Use a programmable output for high-power off grid loads or grid Time-of-use loads - to run only when there is optimum solar - use excess PV power when batteries are full

Off Grid applications - battery agnostic

AC Coupling - retrofits to existing grid tie systems

Battery backup applications

*Note:  For Net Metering applications, if you have a 200A or greater service, you will need to buy a 200A Current Transformer separately. The inverters come with 100A CTs that are appropriate for 2/0 wire.  The 200A CTs support 4/0 wire.


Solar Specifications:

Max Allowed PV Power: 9,000W+9,000W = 16,500 Watts

Max PV Power Delivered to Battery and AC Outputs: 12,000 Watts

Max DC Voltage: [email protected] and [email protected]

MPPT Voltage Range: 150-425V

Starting Voltage: 175V

Number of MPPT: 2

Solar Strings per MPPT: 2 without fuses and 3 with fuses

Max DC Current per MPPT: [email protected] and [email protected]

Max AC Coupled Input (Micro/String Inverters): 7,600 Watts


AC Output Power Specifications (9600W On-Grid & 8000W Off-Grid):

Connections: 120/240/208V split phase

Continuous AC Power to Grid (On-Grid): 9,600 Watts 40A L-L (240V) or 4,800 Watts 40A L-N (120V)

Continuous AC Power to Grid (Off-Grid): 8,000 Watts 40A L-L (240V) or 4,800 Watts 40A L-N (120V)

Surge AC Power 5 sec: 20,000VA L-L (240V) or 10,000VA L-N (120V)

Parallel Stacking: 2-3 (240V), 3 or 6 (208V)

Frequency: 60Hz or 50Hz

Continuous AC Power with Grid or Generator: 12,000 Watts 50A L-L (240V) or 6,000 Watts 50A L-N (120V)

CEC Efficiency: 96.0% (Peak 97.0%)

Idle Consumption Typical – No Load: 60 Watts

Sell Back Power Modes: Limited to Household or Full Grid-Tied

Design (DC to AC): Transformerless DC

Response Time (Grid-Tied to Off-Grid): 4ms

Power Factor: +-0.9 – 1.0


Battery Specifications (Output Power 8000W):

Type: Lead-Acid or Lithium (Li-Ion)

Nominal DC Input: 48V

Capacity: 90-2000Ah

Voltage Range: 43.0V-61.0V

Continuous Battery Charging Output: 190A

Charging Curve: 3-stage with equalization

Grid to Battery Charging Efficiency: 96.0%

External Temperature Sensor: Included

Current Shunt for Accurate % SOC: Integrated

External Generator Start Based on Voltage or % SOC: Integrated

Communication to Lithium Battery: CANBus and RS485


General Specifications:

Enclosure: NEMA type 1 (indoor use)

Ambient Temperature (3 variable speed fans): -13 to 131F (-25 to 55C), >113F (>45C) derating

Display: Color touch screen

Wi-Fi Communication (monitoring or SW updates): Integrated

Snap on Sensors for Limited Selling to Household: Included

Standard Warranty (verified by HALT testing): 10 years




* SHIPPING/PAYMENT OPTIONS *


There are 2 ways to get an exact quote for the base shipping for your 48V 12kW DC to AC Power Hybrid Inverter order.

1. Contact us at (801) 449-0681 9am-5pm Monday-Friday or email [email protected] or go through our Contact Us page

Or

2. Place your order by clicking in the shopping pallet “Proceed To Checkout”

a. Enter your information so we can get you a shipping quote

b. Select the “Shipping Method” of preference

c. Confirm the “Choose one payment method” has “Shipping Quote Request” selected

d. Click the “Check Out” button

e. You’ll receive a confirmation email of your request, as will we

We’ll research the exact shipping cost and send you an invoice to your PayPal or email or you can add it to your pallet in $1 Shipping Increments for your 48V 12kW DC to AC Power Hybrid Inverter order.

 


* PARA ESPAÑOL *

Si se encuentra en un país hispanohablante (América Latina / España) y desea comprar este producto, deberá ponerse en contacto con Reid. Es un proceso realmente simple que consiste en enviar información de envío (dirección y fecha de llegada deseada) @ [email protected].

 

Investigaremos el costo de envío exacto y le enviaremos una factura por su producto.



Quantity discounts show in the “Shopping Pallet”.

We love to meet or beat any competitor’s price!


Higher volume discounts, price matching or questions?

Contact Carl, our resident specialist.

9am-9pm Mon-Sat MDT

(801) 449-0681

or email

[email protected]

Or

[email protected]

or through our Contact Us page

Related Items
10KW 120V, 220V, or 240V<br>For Lithium Battery Packs<br>Solar Charge Controller
10KW 120V, 220V, or 240V
For Lithium Battery Packs
Solar Charge Controller
600-2400 Watts MPPT<br>For Lithium Battery Packs<br>Solar Charge Controller
600-2400 Watts MPPT
For Lithium Battery Packs
Solar Charge Controller
12V, 24V or 48V 85A MPPT<br>Solar Charge Controller<br>Can operate in parallel
12V, 24V or 48V 85A MPPT
Solar Charge Controller
Can operate in parallel
Browse Similar Items

INVERTERS AND SOLAR CHARGE CONTROLLERS
 > - UL APPROVED GRID-TIED PURE SINE WAVE INVERTERS