Features:
Grid-Interactive of Off-Grid capability in the
same package - can be used with or without energy storage - add batteries down
the line
Easy and fast to install - no external components
(ie. fuses, breakers, combiner box) - all integrated in one unit
Lightweight - only 75- 77 lbs.
Color touch screen
Works with the widest variety of 48V battery
chemistries - from lead acid to lithium
Backup power (even use the Grid as backup!) and
support for time-of-use optimization
Completely pre-wired system - inverter and charge controller
included
Wi-Fi integrated for easy monitoring of system
performance
Integrated DC Disconnect, Auto Gen Start, Critical
Loads panel
Highly efficient - both on-grid and off-grid
Generator support
Field-upgradeable software with remote support
NEMA 1 enclosure for indoor use only
Fully NEC compliant (North America) with rapid
shutdown
Applications:
Grid-Tied
Mode - Sell power back to the Utility to reduce your electric bill*
Meter
Zero Mode - Zero your electric bill without adding an additional smart meter
Time-Of-Use
Mode - Use solar and batteries to minimize grid power usage when it's most
expensive
Smart
Load Mode - Use a programmable output for high-power off grid loads or grid
Time-of-use loads - to run only when there is optimum solar - use excess PV
power when batteries are full
Off
Grid applications - battery agnostic
AC
Coupling - retrofits to existing grid tie systems
Battery
backup applications
*Note:
For Net Metering applications, if you have a 200A or greater service,
you will need to buy a 200A Current Transformer separately. The inverters come
with 100A CTs that are appropriate for 2/0 wire. The 200A CTs support 4/0 wire.
Solar Specifications:
Max PV Power Delivered to Battery and AC Outputs: 8,000
Watts
Max DC Voltage: [email protected] and [email protected]
MPPT Voltage Range: 150-425V
Starting Voltage: 175V
Number of MPPT: 2
Solar Strings per MPPT: 2 without fuses and 3 with
fuses
Max DC Current per MPPT: [email protected] and [email protected]
Max AC Coupled Input (Micro/String Inverters): 7,600
Watts
AC Output Power Specifications (9600W On-Grid
& 8000W Off-Grid):
Connections: 120/240/208V split phase
Continuous AC Power to Grid (On-Grid): 9,600 Watts 40A
L-L (240V) or 4,800 Watts 40A L-N (120V)
Continuous AC Power to Grid (Off-Grid): 8,000 Watts 40A
L-L (240V) or 4,800 Watts 40A L-N (120V)
Surge AC Power 5 sec: 20,000VA L-L (240V) or
10,000VA L-N (120V)
Parallel Stacking: 2-3 (240V), 3 or 6 (208V)
Frequency: 60Hz or 50Hz
Continuous AC Power with Grid or Generator: 12,000
Watts 50A L-L (240V) or 6,000 Watts 50A L-N (120V)
CEC Efficiency: 96.0% (Peak 97.0%)
Idle Consumption Typical – No Load: 60 Watts
Sell Back Power Modes: Limited to Household or Full
Grid-Tied
Design (DC to AC): Transformerless DC
Response Time (Grid-Tied to Off-Grid): 4ms
Power Factor: +-0.9 – 1.0
Battery Specifications (Output Power 8000W):
Type: Lead-Acid or Lithium (Li-Ion)
Nominal DC Input: 48V
Capacity: 90-2000Ah
Voltage Range: 43.0V-61.0V
Continuous Battery Charging Output: 190A
Charging Curve: 3-stage with equalization
Grid to Battery Charging Efficiency: 96.0%
External Temperature Sensor: Included
Current Shunt for Accurate % SOC: Integrated
External Generator Start Based on Voltage or % SOC:
Integrated
Communication to Lithium Battery: CANBus and RS485
General Specifications:
Enclosure: NEMA type 1 (indoor use)
Ambient Temperature (3 variable speed fans): -13 to
131F (-25 to 55C), >113F (>45C) derating
Display: Color touch screen
Wi-Fi Communication (monitoring or SW updates):
Integrated
Snap on Sensors for Limited Selling to Household:
Included
Standard Warranty (verified by HALT testing): 10
years