6kW Inverter Either 24V or 48V DC Input 120V/240VAC 50Hz 60Hz Output 85A Battery Charger Pure Sine Wave Works With Lithium or Lead Acid Batteries 23.5L * 8.5W * 7H in - 99.2 Lbs.

Features:

·       Input voltage: 24V or 48V

·       Split Phase Output Voltage: 120V or 240VAC

·       Power output: 6,000W continuous, 18,000W peak

·       50Hz/60Hz output frequency

·       Pure sine wave output, <10% under full linear load Total Harmonic Distortion (THD)

·       Nominal Efficiency: >88% (Peak)

·       Line Mode Efficiency: >95%

·       Typical Transfer Time: 10ms (Max)

·        Auto Generator Start

·        High overload ability up to 300% of rated power (20 sec)

·        Low quiescent current, low power “Power Saving Mode” to conserve energy

·        4-step intelligent battery charger, PFC (Power Factor Correction) for charger

·        8 pre-set battery type selector switch plus de-sulphation for totally flat batteries

·        Powerful charge rate of up to 120Amps, selectable from 0%-100%

·        10 ms typical transfer time between battery and AC, guarantees power continuity

·        Smart LED remote control panel

·        AC voltage regulation available

·        15s delay before transfer when AC resumes, extra protection for loads when used with generator

·        Allows start up and through power with depleted batteries

·        Multiple controlled cooling fans

·        Extensive protections against various harsh situations

·        13VDC battery recovery point, dedicated for renewable energy systems

Click for instructions for connecting the LCD Remote Control Module

Click for description of the BTS – Battery Temperature Sensor