The
highly programmable LCD screen allows user to set a wide range of inverter
specs such as:
1.
AC output Frequency: 50hz or 60hz
2.
AC output voltage: 120/240 Volts
3.
Power priority: Solar, battery, or Utility
4.
AC Input voltage range
5.
Charging current amp & voltage
6.
Power saver mode
7.
Auto restart after overload or over-temperature
8.
Enable/Disable neutral to ground bonding
Features:
Automatic Solar Charging When the Inverter is Powered Off
Auto Generator Start
Smart remote monitor with Wi-Fi or GPRS Module
Manual 50Hz/60Hz output frequency switch for worldwide operation
Maximum THD: 3% at nominal battery voltage
Powerful 4-stage power factor corrected battery charger up to 100 Amps, settable from 10A-100A
High surge output capability, 300% peak load for 5 seconds
Ultra-low quiescent current, low power ‘Power Saver Mode’ to conserve energy
Equalization Charging
10ms transfer time from AC to battery for the continuous load operation
Thermally controlled variable speed fan for more efficient cooling
Extensive protections against various harsh situations
Solar Priority or SBU developed for renewable energy systems
120A MPPT solar charger (Max Input Voltage - 250V) (Input Current - Two circuits of 40 Amps each per one circuit at 80 Amps)
Specifications:
Low
Battery Cut Off: 40Vdc (40-48Vdc resettable)
Solar/Battery to Utility (DC to AC) transfer voltage: 44V (44-51.2Vdc resettable)
Utility
to Solar/Battery (AC to DC) transfer voltage: 50V (48-58Vdc resettable)
CV/Fload
voltage : 50V (48-58.4V resettable)
Inverter
Output Specifications:
•
Continuous Output Power: 6000 Watts
•
Surge Rating: 18000 Watts 5 seconds
•
Output Waveform: Pure Sine/Same as input (Bypass Mode)
•
Output Voltage: 104/208V, 110/220V, 115/230V, 120/240Vac (resetable on LCD)
•
Nominal Efficiency: 85% (Peak)
•
Line Mode Efficiency: >95%
•
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
•
Typical Transfer Time: 10ms (Max)
•
THD: <10%
Non-Lithium
version Input Specifications:
•
Nominal Input Voltage: 48.0Vdc
•
Low Battery Cutoff: 40.0-48Vdc
•
Low Battery Alarm: 42-50Vdc
•
DC to AC Transfer in SBU or Solar first mode: 44-51.2V
•
AC to DC Transfer in SBU or Solar first mode: 48-58V
•
High Voltage Cutoff: AGM:60V/FLD:62V/ USE mode: C.V+4V
•
High Voltage Recovery: 58V
Lithium
version Input Specifications:
•
Low Battery Cutoff: 5%-30% SOC
•
Low Battery Alarm: Low Battery Cutoff SOC+5%
•
DC to AC Transfer in SBU or Solar first mode: 20%-50% SOC
•
AC to DC Transfer in SBU or Solar first mode: 60%-100% SOC
•
High Voltage Cutoff: AGM:60V/FLD:62V/ USE mode: C.V+4V
•
High Voltage Recovery: 58V
•
Idle Consumption: 80 Watts
•
Power Saver Mode Idle Consumption: 20 Watts
Charger
Specifications:
•
Output voltage: Depends on battery type selector setting
•
AC Charger Rate: 60Amp
•
MPPT Charger Rate: 80Amp
•
Over Charge Protection Shutdown: 62.8V
•
Input voltage range:154-272Vac
•
Adjustable charge current
•
Four Stage Smart Charger
Dimensions:
•
Unit Weight: 99 Lbs. (45 Kg)
•
Unit Size L x W x H: 21.3 * 14.2 * 8.6 in. (540 * 360 * 218mm)
•
Shipping Weight: 110 Lbs. (50 Kg)
•
Shipping L x W x H: 26.0 * 18.9 * 12.6 in. (660 * 480 * 320mm)
Electric Car Parts Company