| Battery to Battery Charger 12V Input to 12V Output
30 Amp DC Powered Lithium Charger Off the Alternator
You can use the Battery to Battery Charger to charge your auxiliary
battery bank from your vehicles alternator. No more waiting to charge your
batteries until you reach your destination. You can now charge them while you
travel.
Features of the 12V Input to 12V Output 30 Amp Battery to Battery Charger: ·
Multiple Activation Modes (Automatic for most non-vehicle
applications) o
Manual for remote activation o
Regenerative braking (requiring ignition feed) o
Automatic regenerative braking (requiring no ignition feed) ·
Input 12V and Output charging at 12V ·
Much larger model up to 3000W coming soon ·
Current is NOT taken from the input battery and given to the output
battery. The B2B uses alternator power to charge the output battery. Manual
mode and regenerative braking mode allows you to override this. ·
Safety features o
100% fire proof plastic box o
No screws to corrode o
Thermal power reduction o
Multi stage fan cooling ·
Night Time Setting (Allows the unit to run at half the power to
reduce fan noise) ·
Boost / Reduce Charging (The B2Bs ensure batteries get the correct
charging profile irrespective of high or low input voltages) ·
B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V) to keep
from draining the input battery. Regenerative braking mode allows the input
voltage to drop to 12.2V (x 2 for 24V) ·
Customizable Profile (Choose your own charging profile on the
front panel) ·
9 preset battery chemistry options (Including AGM, LiFePO4, Gel,
Flooded, and sealed lead acid) ·
4 stage battery charging (The B2B charges batteries between 5-20
times faster than a stand-alone alternator) ·
Very Simple to Install (No Electronic Control Unit (ECU) issues.
No complex wiring. No warranty issues. Fully prepared for smart alternators
(regenerative braking).) ·
Optional remote control
|