HyPer 9HV IS Motor
The HyPer 9HV Integrated System (IS) is the ideal power-train for any light to mid-weight daily driver. Combine multiple systems for heavy-weight and racing vehicles. Our HyPer 9HV motor is a Synchronous Reluctance Internal Permanent Magnet (SRIPM) AC motor. The HyPer 9HV IS will include a 144V brushless HyPer 9HV motor, HyPer-Drive X144 Controller/Inverter, Low Voltage Wire Harness, and Main Contactor!
On the technical side, the HyPer 9HV, runs at a nominal voltage of 144V. Peak efficiency reaches ~95%. Maximum current is 500 Amps. Shaft torque has been measured at 162 Lbs.-ft. at zero RPM. Peak RPM is 8000 with a maximum continuous RPM of 3600. Dimensionally, it is 13.98” long with a sealed frame diameter of 8.66” and a weight of 120 Lbs.
Technical Specifications:
· Type: SRIPM
· Voltage: 144V Nominal
· Current: 500 Amp
· Efficiency Peak: 95%
· KW Peak: 100 @ 170V
· KW Continuous: 38 @ 3,600RPM
· RPM Peak: 8,000
· RPM Continuous: 3,600
· Torque: 162 Lbs.-ft. @ 0 RPM
· Regen: Yes, Tailorable
· Motor Diameter: 8.66”
· Motor Length: 13.976”
· Motor Weight: 120 Lbs.
· Controller Weight: 9 Lbs.
· Shaft: Single Ended, Keyed
· Mounting: B-Face (WarP 9)
· Insulation: Class “H”
· Software: SmartView
· Delivery: Stock
SRIPM Advantages:
EFFICIENCY
The Reluctance Rotor is a low loss design for current to take a natural path of least resistance. There are no windings in the rotor - this means 0 ohmic rotor losses. Cooling fans are not required, yielding even lower losses.
PRECISION
The constant and revolving fields rotate at synchronous speeds, allowing for precise control with no rotor slip.
TORQUE
The Internal Permanent Magnets produce significant torque over non-magnetic SR motors.
INTEGRATION
The Integrated motor and controller/inverted are designed for and mapped to one other for maximum performance and efficiency.
Not AC Induction
Not Axial Flux Permanent Magnet
The HyPer 9HV is a 3 Phase AC, Synchronous Reluctance Internal Permanent Magnet (SRIPM) Motor, and it is powered by a matching Synchronous X1 Controller/Inverter.
Stay ahead of the curve with this unique and revolutionary technology which differs from AC Induction and traditional Permanent Magnet technology on so many levels. The HyPer 9HV IS works much like an AC induction system, but thanks to its Synchronous Reluctance rotor, the HyPer 9HV is capable of running in IEC's highest efficiency class of IE4 "Super Premium Efficiency". If you need a power dense brushless motor, you are no longer locked in to paying the high price of rare earth Permanent Magnet systems. The HyPer 9HV's Permanent Magnet technology produces an additional 30-40% peak torque over similar sized AC Induction motors - at a comparable cost!
· Advanced programmability
· Tailorable regenerative braking and Single Pedal Driving
· Toggle between multiple operating profiles on the move
· Industry standard mounting and shaft make for a simple swap from/to WarP motors.
· Incredible power to weight ratio
· Designed for electric vehicles
· Click Here - for drawings, performance data, sales sheets, and more!
Specifications Sheet
Torque Graph
Engine Drawing
HyPer Drive X1 Controller User Manual
Click here for more general information about choosing the right EV motor
HyPer 9HV IS AC Motor Accessories:
$1,874 – HyPer-Drive X1 Controller/Inverter – 100V 750A with Standard Ampseal Wire Harness – Requires GV200QA-1
$2,074 – HyPer-Drive X144 Controller/Inverter – 144V 500A with Standard Ampseal Wire Harness – Requires GV200PA-1
$135 – Chill Plate – Liquid Cooling Plate for HyPer-Drive X1 & X144 – Solid Aluminum – Machined Channels – 1/8” NPT Port Holes
$112.50 – Motor Cradle – Stainless Steel Clamp – Two Locking Bolts – Rubber Bushings – Two Mounting Feet – 220mm ID for HyPer 9 Motors
$135 – Throttle Pedal Assembly – Recommended Throttle Control Unit for any HyPer-Drive Controller/Inverter – 0-5V Potentiometer Pedal Assembly
$150 – Compact Display – Diagnostic Display with LIN communication for HyPer-Drive Controller/Inverter
$130 – Mini Display – Round Diagnostic Display with LIN communication for HyPer-Drive Controller/Inverter – 60mm OD
$125 – Gigavac Contactor – 36-48V coil – 4000A max – External PWM – Essential Add-on for SRIPM-X1
$125 – Gigavac Contactor – 12V coil – 4000A max – External PWM – Essential Add-on for SRIPM-X144
$140 – Gigavac Contactor – 12V coil – Internal Economizer – 4000A max – Internal PWM
$140 – Wire Harness Kit – Spare Wire Harness Kit for HyPer-Drive Controllers. Includes K1 Plug populated to standard pinout. – Serial to USB Cables – Motor Plug Kit – HV Key Switch Relay
Are you are shipping to a business, and do you have a dock or forklift for getting the motor off the truck?
Basic shipping to a business runs around $150, residential adds $89, liftgate adds $89.
|
*
SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your HyPer 9HV IS 144V 500A AC motor order.
1. Contact
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or go
through our Contact
Us page
Or
2. Place
your order by clicking in the shopping pallet “Proceed To Checkout”
a. Enter
your information so we can get you a shipping quote
b. Select
the “Shipping Method” of preference
c. Confirm
the “Choose one payment method” has “Shipping Quote Request” selected
d. Click
the “Check Out” button
e. You’ll
receive a confirmation email of your request, as will we
We’ll research the exact shipping cost and send you an invoice
to or email or you can add it to your pallet in $1
Shipping Increments
for your HyPer 9HV IS 144V 500A AC motor order.
|
Quantity discounts show in the
“Shopping Pallet”.
We love to meet or beat any competitor’s price!
Contact us
with questions
9am-5pm Monday-Friday
(mountain time)
(801) 566-5678
or email
[email protected]
or through
our Contact Us page
