Single
Pole Single Throw (SPST) 200 AMP
Contacts 12
Volt-900 Volt with 9
Volt-36 Volt DC Coil UL Listed (x16) each
in USA Stock (no minimum order)
This contactor only takes 0.15 amps to hold the contacts closed while more conventional contactors take >1.2 amps
Ideal for solar and other applications
where it must remain on longer
FEATURES of
SPST 200 AMP Contacts ·
200A breaking current, small volume ·
Switch DC loads at both low and high voltage from
12 to 900VDC ·
Coil power is very low, built-in coil economizer is
only 1.8W ·
Application: For an Electric Control System, Communication
Power Supply, Solar System, Heavy truck, Emergency Vehicle, Boat, Light Rail, Mining,
Charging System, Train, UPS etc. ·
Safety Approvals: UL CCC SPECIFICATIONS of SPST 200 AMP
Contacts
Contact Type
|
SPST-NO
|
Rated Load Current of Contact
(Resistive load)
|
200A
|
Maximum Switch Current
|
2000A (320VDC)
|
Contact Voltage Drop
|
Max. 80mV at 200A
|
Switching Voltage
|
12~900V DC
|
Max Standard Pick-up Time
|
30ms.
|
Max Contact Bounce Time
|
5ms.
|
Max Release Time
|
10ms.
|
Sinusoidal Vibration (80-2000Hz Peak)
|
80~2000 HZ
|
Shock (11ms, ½ sine, peak, operating)
|
<20g
|
Operating Ambient Temperature
|
-40F to +185F (-40C~+85C)
|
Relative Humidity
|
20%~90% RH
|
Insulation Resistance
|
Min. 100 milliohms @ 500VDC
|
Dielectric Strength
|
2200VAC 50 Hz/60 Hz (1 minute)
|
Mechanical Life
|
300,000 Times
|
AUX. Type
|
1NO
|
AUX. Contact Rated Load
|
2A / 24V
|
AUX. Contact Min. Load
|
100mA / 8V
|
Mounted Direction
|
Any Direction
|
Weight
|
1.2 Lbs. / 0.55 Kg
|
|