Features:

• USB Programming Port to make programming the Alltrax controller easier than ever.
• Will work between 24V and 48V with a simple programming change.
• Easily adapts to new motors by a Motor Map that can be uploaded to the controller via the Toolkit Program.
• Seamless transition between motoring, plug braking and regen braking gives the smoothest drive ever.
• Battery Current Limit setting for extra protecting when using Lithium Batteries.
• On-board CAN connector for effortless communication to future Alltrax Accessories and 3^rd party devices.
• Advanced heatsink thermal design and protection provides for higher instantaneous and continuous power and over temperature protection with no loss of power.
• Optional Universal Mounting bracket to simplify the installation process of the XCT to OEM hole patterns.
• Optional Fan Cover to increase the continuous rating of the controller up to 30% with additional airflow across the heatsink.
• Operating Frequency: 18kHz
• Controller Voltage, KSI & Reverse: XCT48XXX 24-48V nom, 62V max
• Operating Temp: -4F to 185F (-20C to 85C), shutdown @ 203F (95C)
• Environmental Operating Temp: -4F to 122F (-20C to 50C)
• Standby Current (Power up): <1W nom, <8W Fan on
• Standby Power: <20mA
• Relay Drive Current: 5A peak, 1A continuous
• Throttles Supported: 0-5k, 5k-0, E-Z-GO ITS, Club Cart 5k-0 3 wire (MCOR), 0-5v, Taylor Dunn 6v-10.5v, USB Throttle, Yamaha 0-1k, Absolute Mode
• Terminal Torque: Torque bolts to 60-80 in. Lbs. (5-7 ft./Lbs., 6.77-9.4Nm) 

Quantity discounts show in the “Shopping Pallet”.

We love to meet or beat any competitor’s price!

Higher volume discounts, price matching or questions?

Contact Carl, our resident specialist.

9am-9pm Mon-Sat MDT

(801) 566-5678

or email

[email protected]

Or

[email protected]

or through our Contact Us page