BTS – Battery Temperature Sensor
With 32.8 Feet (10M) of Cable
Applying the proper charge voltage is critical for achieving optimum battery performance and longevity. The ideal charge voltage required by batteries changes with battery temperature.
The Battery Temperature Sensor (BTS) allows the charge controller to continuously adjust charge voltage based on actual battery temperature.
Temperature compensation of charge voltage assures that the battery receives the proper charge voltage as battery temperature varies.
The entire line is equipped with Battery Temperature Sensing for increased charging precision.
The BTS sends precise information to the charger, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.
When the battery voltage is over 104F (40C), it will reduce the charging voltage by 0.1Vdc with every degree of temperature rise.
We recommend that you install Battery Temperature Sensors on all banks to protect your batteries and to provide optimal charging of each bank.
The Battery Temperature Sensor mounts on the side of a battery or any other location where the precise temperature of the battery can be detected such as battery mounting racks.
Important: If the battery temperature is allowed to fall to extremely cold temperatures, the Inverter with a BTS may not be able to properly recharge cold batteries due to maximum voltage limits of the Inverter. Ensure the batteries are protected from extreme temperatures.
The following table describes approximately how much the voltage may vary depending on the temperature of the batteries:
Temperature on BTS
BTS >122F (50C)
BTS <104F (40C)
104F (40C) < BTS < 122F (50C)
Increases the low voltage shut down
point by 0.5Vdc
BTS >122F (50C)
Over Temp Fault
SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your battery temperature sensor – BTS order.
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected]arpartscompany.com or go
through our Contact
your order by clicking in the shopping pallet “Proceed To Checkout”
your information so we can get you a shipping quote
the “Shipping Method” of preference
the “Choose one payment method” has “Shipping Quote Request” selected
the “Check Out” button
receive a confirmation email of your request, as will we
We’ll research the exact shipping cost and send you an invoice
to or email or you can add it to your pallet in $1
for your battery temperature sensor – BTS order.
Quantity discounts show in the
We love to meet or beat any competitor’s price!
our Contact Us page