Classic
Style Gauge
Panel 60-160
VDC State of Charge Gauge
Panel Comes With: 1ea
60-160 VDC #4 pos #5 neg @ 4.3 ma State of Charge IMPORTANT! For
lighting, order light kit # 186 (12 vdc) If
no reading: Check all connections. Check
vehicle equipment wiring instructions for proper wiring. Install
the instrument in a 2-1/16 hole in convenient operating place. Use U clamp to
hold in place. On
the rear of the instrument there are connecting pins with corresponding
numbers. Use patch cable provided to connect the instrument to the appropriate
power source. See illustration. Connect
pin #5 to the low volt side. Connect pin #4 to 60-160 volts D.C. high volt
side. See illustration. Patch
cable may be shortened or lengthened without affecting accuracy of unit. Using
20-22 gauge stranded wire is recommended.
|
* SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get an exact quote for the base shipping for
your classic style gauge panel 60-160 VDC state of charge order.
1. Contact
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or go
through our Contact Us page
Or
2. Place your order by clicking in the shopping pallet “Proceed
To Checkout”
a. Enter your information so we can get you a shipping quote
b. Select the “Shipping Method” of preference
c. Confirm the “Choose one payment method” has “Shipping Quote
Request” selected
d. Click the “Check Out” button
e. You’ll receive a confirmation email of your request, as will
we
We’ll research the exact shipping cost and send you an invoice
to your PayPal or email or you can add it to your pallet in $1
Shipping Increments for your classic style gauge panel 60-160 VDC state of charge order.
|
Quantity
discounts show in the “Shopping Pallet”.
We love to meet or beat any
competitor’s price!
Higher volume discounts, price matching or questions?
Contact Carl, our resident specialist.
9am-9pm Mon-Sat MDT
(801) 566-5678
or email
[email protected]
Or
[email protected]
or through our Contact
Us page |
