Up
to 4 Amps (4000mA) 2V Continuous Balancing!
Battery
AH 50-3000!
Unlimited
Cell Count
Lead
Acid-AGM-Gel-Silicon
Balances
during charge, discharge, and storage
Battery
Voltage-Amperage Balancers/Equalizers
3.1
* 1.5 * 0.8 in. (80 * 38 * 21 mm)
Keeps
Your Batteries Voltage Difference within 30mV!
*International Stock/Production
Available (No Minimum Quantity)
*Need more than 20 each or 10 each? Just
add multiple sets to your pallet.
Click here to view a
short video of the balancer in action
Click here to see the balancers connected to
batteries
QUANTITY
PRICING
|
1-15
|
$24.50
|
16-49
|
$22.50
|
50-99
|
$20.50
|
100+
|
$19.50
|
Why
you need a Battery Balancing System
The individual cells in a battery pack are
rarely an exact duplicate of all the cells in the battery pack.
In actual practice, when a pack of
batteries reaches a specified charge cutoff voltage then the charger will shut
off. If one cell in a pack reaches that voltage before other cells reaches a
full charge it will cause the charger to shut off – prematurely denying the
balance of the pack a full charge.
Conversely, when the weakest cell in a
pack reaches its discharge cutoff voltage it will show as the discharge point
and shut down the pack prematurely – thereby denying the user the balance of
energy the other cells have stored.
These battery equalizers prevent this from
happening. This yields up to 30% more power and will extend the life of the
battery pack.
Benefits:
§ Quick and easy installation
§ Keeps your batteries voltage difference within 30mV!
§ May increase the lifespan of your battery pack by 2-3
times by preventing the batteries from being overcharged or over discharged
§ Helps prevent lead acid battery vulcanization
Features:
§ High-frequency pulse, dynamic battery voltage-amperage balancer
§ Simple wiring and high efficiency
§ Works with all charger amperage and voltage inputs
§ All 1S Single Balancers come with the interconnecting
and battery wiring
§ The lead-acid option comes in 1S Singles of 2v or
12.8v each
§ 0.5m/1.5ft maximum suggested wire length for all the
multiple series balancers. (35m 4S, 5S, 6S, 8S)
§ Idle Current Draw is <50mW
§ Series modules
· Modules may work with 3, 4, 5, 6, or 8 batteries in
series (AKA 3S, 4S, 5S, 6S, or 8S)
· Does not come with the wiring to connect to the
batteries
Example:
A
144v pack of 48 cells,
20
in the front and 28 in the back
can
use 8S+8S+4S in front
and
8S+8S+8S+4S in the back.
Single User Manual
3-8S User Manual
BMS
Fundamentals Explained
Note: This balancer emits a very
high-frequency tone that some people can hear if they are within 10 feet.
Note: Please check the wiring diagram for
how to connect these modules or contact us to avoid making mistakes during
installation.
Here are several ways to make sure they
are installed correctly:
1. Measure the voltage of the batteries with a
multi-meter to see if all the batteries voltage is normal.
2. Listen. If the balancers are connected correctly, they
will produce a high-frequency sound. Because the sound is quiet, you need to
get close to the balancers. The more balanced the batteries are, the smaller
the balance current it will have, and the softer sound they will make and vice
versa. If they are connected the wrong way, you won’t be able to hear the
sound.
Specifications:
BATTERY AH LIMITS
|
50-3000
|
LEAD ACID BATTERY
VOLTAGE LIMITS
|
2V – 5V
|
BATTERY COUNT LIMIT
|
2S-Unlimited
Balance at least 2
cells
|
BATTERY CAPACITY
LIMIT
|
Unlimited
|
BMS LIMIT
|
Can work with BMS
or can work
independently
|
BATTERY TYPE
|
AGM, Gel, Flooded
|
BALANCER
CONFIGURATION
|
Series and
Paralleled
|
VOLTAGE DIFFERENCE
AFTER
USING THE BALANCER
|
<10mV
|
VOLTAGE DIFFERENCE
VS.
BALANCE CURRENT
|
300mV-1A; 1V-3A
|
POWER CONSUMPTION
|
<50mW per 1S
|
BALANCING
|
High to Low
|
WORKS DURING CHARGE
|
Yes
|
WORKS DURING
DISCHARGE
|
Yes
|
WORKS DURING
STORAGE
|
Yes
|
BALANCING AMPERAGE
|
1-10
|
CONTINUOUS
BALANCING AMPERAGE
|
4
|
MAX BALANCING
AMPERAGE
|
10
|
EFFICIENCY AT 1A
(%)
|
94
|
BALANCE ACCURACY
(%)
|
0.5
|
BALANCE METHOD
|
Energy Transfer
& Dynamic
|
WORKING EFFICIENCY
WHEN BALANCE CURRENT IS 1A
|
>94%
|
RELATIVE HUMIDITY
(%)
|
45-90
|
WORKING ENVIRONMENT
|
Low Humidity
|
WORKING TEMP (F)
|
14 to 122
|
STORAGE TEMP (F)
|
-40 to 158
|
Metric
|
WORKING
TEMP (C)
|
-10
to 50
|
STORAGE
TEMP (C)
|
-40
to 70
|
BALANCER TYPE
|
Battery Voltage-Amperage Balancer
|
Sizes
(Length * Width * Height):
§ 1S single cell:
o 3.1 * 1.5 * 0.8 inch – 80 * 38 * 21 mm
§ 3S Module:
o 4.7 * 2.7 * 1 inch – 120 * 70 * 25 mm
§ 4S Module:
o 5.9 * 2.7 * 1 inch – 150 * 70 * 25 mm
§ 5S Module:
o 7.5 * 2.7 * 1 inch – 190 * 70 * 25 mm
§ 6S Module:
o 8.7 * 2.7 * 1 inch – 220 * 70 * 25 mm
§ 8S Module:
o 11 * 2.7 * 1 inch – 280 * 70 * 25 mm
Why should I use the
balancer?
1. Keeps your
batteries voltage difference within 10mV!
2. Keeps your
batteries safe always. No overcharging or over-discharging.
3. Prolongs your
battery lifespan 2~3 times
4. Very simple
installation
5. Low
price. You pay a small amount of money to protect your battery. Compare to the
cost of replacing your expensive lithium battery, the balancer is very cheap.
6. Fast
delivery. 1~2 business days after payment arrival.
How does the balancer
work? How does it protect batteries?
This
diagram tells you how the balancer works.
Each
battery is compared to a cup.
Each
balancer is like a pump. With the pumps, all the cups will have the same level
of water.
The
balancers are connected in parallel to the batteries.
They
won't affect the charging or discharging of batteries.

* SHIPPING/PAYMENT OPTIONS *
There are 2 ways to get
an exact quote for the base shipping for your battery AH 50-3000 voltage-amperage balancers/equalizers for lead acid batteries order.
1. Contact
us at (801) 566-5678 9am-5pm Monday-Friday or email [email protected] or
go through our Contact Us page
Or
2. Place
your order by clicking in the shopping pallet “Proceed To Checkout”
a. Enter
your information so we can get you a shipping quote
b. Select
the “Shipping Method” of preference
c. Confirm
the “Choose one payment method” has “Shipping Quote Request” selected
d. Click
the “Check Out” button
e. You’ll
receive a confirmation email of your request, as will we
We’ll research the exact
shipping cost and send you an invoice to your PayPal or email or you can add
it to your pallet in $1 Shipping Increments for
your battery AH 50-3000 voltage-amperage balancers/equalizers for lead acid batteries order.
* PARA
ESPAÑOL *
Si se encuentra en un país hispanohablante
(América Latina / España) y desea comprar este producto, deberá ponerse en
contacto con Reid. Es un proceso realmente simple que consiste en enviar
información de envío (dirección y fecha de llegada deseada) @ [email protected].
Investigaremos el costo
de envío exacto y le enviaremos una factura por su producto.
|
Quantity
discounts show in the “Shopping Pallet”.
We love to
meet or beat any competitor’s price!
Contact us
with questions
9am-5pm Monday-Friday
(mountain time)
(801) 566-5678
or email
[email protected]
or through
our Contact Us page